Reading a Logger

Contents  Previous  Next

File Menu > Reading a Logger

Use the File/Read Logger function to check for a logger in the Reader Interface, read the summary data, then read the logged temperatures.  Once the logged temperatures have been read, the window view mode will change to Graph View mode and the logged temperature values are shown plotted as temperature against time.


You can also read the data from a logger by clicking on this speed button on the toolbar displayed along the top of the Temprecord main window, or from the pop-up menu that displays when you press the right-hand mouse button.


When a Mon-T logger is read, the display units are set to the Mon-T programmed logger units.  I.e. if you program a logger in Fahrenheit units and read the logger with Temprecord set to display temperatures in Celsius, the display units will change to Fahrenheit after you read the logger's temperature data.



(C) 1992-2011 Temprecord International Ltd
22/06/2011 10:39:16 a.m.
Temprecord Web Help